YOUR ELECTRICAL QUESTIONS, ANSWERED

Yes, Wiser Electrical Services carries out electrical work for home renovations across Perth, including bathrooms, kitchens, extensions and full home makeovers. We work with both homeowners and builders, handling everything from new circuits and power points to lighting, exhaust fans and switchboard upgrades to support the added load. Every renovation job is completed by a licensed electrician and left compliant with Western Australian regulations.

Yes, Wiser Electrical Services works alongside builders on renovation and construction projects throughout Perth. We coordinate around the build schedule, complete the rough-in before walls are closed and return for fit-off once the space is ready. Working with a licensed Perth electrical contractor (EC 16847) keeps the electrical side compliant and on time.

A bathroom renovation usually involves relocating or adding power points, installing exhaust fans, downlights, heated towel rails, mirror lighting and often an upgrade to RCD protection. Bathrooms are wet areas, so all fittings and their positions must follow the wiring rules for wet areas, using appropriately rated fittings in the right zones. Wiser Electrical Services handles bathroom renovation electrical work across Perth and leaves it fully compliant.

Yes, all electrical work in a bathroom renovation must be carried out by a licensed electrician in Western Australia. Bathrooms combine 240V wiring with water, so the wet-area rules and RCD requirements are strict, and DIY work here is both illegal and dangerous. Wiser Electrical Services completes compliant bathroom renovation electrical work throughout Perth.

A kitchen renovation typically needs dedicated circuits for major appliances such as ovens, induction cooktops and dishwashers, plus extra power points at bench height and updated lighting. Older switchboards often cannot carry the added load, so a capacity check or switchboard upgrade is common as part of the job. Wiser Electrical Services handles kitchen renovation electrical work across Perth from planning to fit-off.

Electrical work happens in two stages: the rough-in, where cabling is run before the walls and ceilings are closed, and the fit-off, where fittings, switches and power points go in near the end. Getting the rough-in right early avoids expensive re-work later, which is why coordinating with a licensed electrician from the start matters. Wiser Electrical Services plans renovation electrical work around the build so nothing holds up the project in Perth.